/56/ -Sieyuan Electric Co., Ltd.
A
Z

Product Index

  • a
  • b
  • c
  • d
  • e
  • f
  • g
  • h
  • i
  • j
  • k
  • l
  • m
  • n
  • o
  • p
  • q
  • r
  • s
  • t
  • u
  • v
  • w
  • x
  • y
  • z
  • POWER QUALITY TREATMENT EQUIPMENT
  • Capacitor
  • Reactor
  • High voltage statcom
  • Low voltage statcom
  • Low voltage APF
  • TEST EQUIPMENT
  • Series resonance
  • Oil chromatography
  • SSUVcam-H600 Ultraviolet Camera
  • Cases

  • Solutions
  • Power grid
  • Generation
  • Port
  • Railway
  • Coal
  • Municipal
  • Urban Rail Transit
  • Our customers
  • Our cases
  • News

  • Company news
  • Media report
  • Industry trends
  • About Sieyuan

  • Company profile
  • Corporate Culture
  • Organization Chart
  • Honor Qualification
  • Milestones
  • Contact Sieyuan
  • Integrity - Sustainabilty
  • Join us

  • Español
    中文
    Русский язык
    PORTUGUÊS
    Français
    Products Products
    Products

    Products

    LVQB series SF6 gas-insulated current transformer

    product outline
    product parameters
    product manual

    Product Description:
    LVQB series current transformer has an inverted structure with SF6 gas insulation (Please see the figure). It is connected in series with electric energy measurement, measuring, and relay protection functions.

    Environment:

         -30℃~+45℃
     
    Features:
         Primary coil has a through-type conducting rod structure with good dynamic and thermal stability; its maximum thermal current can be up to 63kA/3s (when primary coil is connected in series).
         Primary coil passes through the center of secondary coil without flux leakage. Measurement precision can be up to 0.1 and 0.2S grades.
         Secondary coil is fixed in an aluminum shielded-case by casting organic materials; measurement and protection circuits cannot be damaged by insulation breakdown.
         Optimal Electrode shielded structure improves internal and external field distribution of the product. It has an excellent insulation property. Partial discharge test is carried out under power frequency test voltage.

    There are two types of external insulation bushing for customers: they have excellent explosion-resistant and shock-resistant behaviors.
       ▲ External bushing uses silicon rubber umbrella type apron reinforced by glass fiber. Optimal external surface field makes silicon rubber avoid electrical erosion.
       ▲ Porcelain bushing shell with high-strength.
     
    Secondary outlet box is a complete structure by casting the aluminum alloy; its sealing structure meets the requirement of IP55, which is dust proof, water proof and air permeable; secondary terminal for wiring uses Phoenix special terminal; it is more convenient for operations such as plug-in, pull-out and wiring etc.

    Seal ring is made of imported fluorocarbon silicone rubber, it is suitable for using in the area where there is great temperature change or the environmental temperature is extreme. The leakage rate per year is less than 0.5%.

    Product performance keeps changeless after severe transporting test.

    Use an aluminum alloy cast case, all components including the base, connection box, stainless steel expander, and nameplate etc do not rust forever.

    A density meter is installed on the base, this meter can show the gas pressure and density in the transformer (The show value is turned to be the internal gas pressure at 20℃ automatically). A signal for refilling gas is sent out when the pressure in the transformer drops down to the alarm pressure.


    Rated voltage: 35kV~500kV

    Rated frequency: 50/60 Hz

    Internal insulating medium: SF6 gas

    Rated primary current: Up to 4000A

    Short-time thermal current: Up to 63kA/3s

    Insulator: Porcelain or polymer

    Altitude: ≤3000m, others on request

    Specific creepage distance: 31mm/kV, others on request